51單片機12864液晶字符顯示

#include
#include
#include
#define uchar unsigned char
#define uint unsigned int

#define LCD_data P0 //定義數據口
sbit LCD_RS=P3^5; //數據命令選擇端，高電平為寫數據，低電平寫命令

sbit LCD_RW=P3^6;//讀寫控制端，高電平讀信息，低電平寫信息
sbit LCD_EN=P3^7; // 使能端
sbit LCD_PSB=P3^4; //拉高 ，選擇并行

//單片機特殊功能位聲明

uchar code dis1[]={"姓名：浩泉"};
uchar code dis2[]={"性別：男"};
uchar code dis3[]={"卡號：050817"};
uchar code dis4[]={"www.szu.edu.cn"};

void delay_1ms(uint x) //延時函數1ms
{
uint i,j;
for(j=0;j for(i=0;i<148;i++);
}

void write_cmd(uchar cmd) //寫命令函數，請參考12864液晶手冊
{
LCD_RS=0; //低電平，寫入命令
LCD_RW=0;

P0=cmd; // 賦值
delay_1ms(5);
LCD_EN=1;//使能端拉高送入命令

delay_1ms(5);
LCD_EN=0;
}

void write_date(uchar date) //寫數據
{
LCD_RS=1;
LCD_RW=0;

P0=date;
delay_1ms(5);
LCD_EN=1; //使能端拉高送入數據

delay_1ms(5);
LCD_EN=0;
}

void lcd_pose(uchar X,uchar Y) //液晶顯示位置函數
{
uchar S,pose;
switch (X)
{
case 0:
S=0x80; //液晶第一行顯示
break;

case 1:
S=0x90; //第二行顯示
break;

case 2: //第三行顯示
S=0x88;
break;

case 3: //第四行顯示
S=0x98;
break;
}
pose=S+Y;
write_cmd(pose);
}

void lcd_init() //液晶初始化函數
{

LCD_PSB=1; // 并行選擇，請參考液晶指令表
write_cmd(0x01);
delay_1ms(5);
write_cmd(0x30);
delay_1ms(5);
write_cmd(0x0C);
delay_1ms(5);
write_cmd(0x06);
delay_1ms(5);
}

main()
{
uchar i;

lcd_init();
lcd_pose(0,0); //液晶第一行第一列的第一個字符顯示
i=0;
while(dis1[i]!=/0)//查詢沒有到字符串末尾
{
write_date(dis1[i]); //寫入字符
i++;
}
lcd_pose(1,0);//第2行
i=0;
while(dis2[i]!=/0)
{
write_date(dis2[i]);
i++;
}
lcd_pose(2,0); //第3行
i=0;
while(dis3[i]!=/0)
{
write_date(dis3[i]);
i++;
}
lcd_pose(3,0); //第4行
i=0;
while(dis4[i]!=/0)
{
write_date(dis4[i]);
i++;
}
while(1);

}