新聞中心

EEPW首頁 > 嵌入式系統 > 設計應用 > S3C2410的內存映射

S3C2410的內存映射

作者: 時間:2016-11-20 來源:網絡 收藏
這片文章主要介紹S3C2410內存映射,主要參考2410的用戶手冊。

我用的板子是基于三星的2410,三星的內存片選有8個bank,這里所謂的bank我開始也不是很清楚,在網上搜了一通也不知所云,但是當我看了 2410的用戶手冊后才有點明白,這里的bank就是片選,一個片選就是一個bank,在U-Boot中,配制的時候要配制SDRAM和FLASH的 bank數,那么如果你的SDRAM或者FLASH就接了一個片選的時候,就定義為1就可以了,其他的類推。
下面是2410的內存映射圖,2410和其他的大部分的處理器一樣,支持NorFlash和NANDFlash啟動,而這兩種啟動方式內存所映射的地址不怎么相同,我的板子沒有NANDFlash,所以就以從NorFlash啟動為例子了:
==============================================<-------0xFFFF_FFFF
| NOT USED
==============================================<-------0x6000_0000
| SFR Area (各個接口的控制寄存器)
==============================================<-------0x4800_0000
==============================================<-------0x4000_0FFF
| BootSRAM (4KBytes)
==============================================<-------0x4000_0000
| SROM/SDRAM nGCS7 (bank7)
==============================================<-------0x3800_0000
| SROM/SDRAM nGCS6 (bank6)
==============================================<-------0x3000_0000
| SROM nGCS5 (bank5)
==============================================<-------0x2800_0000
| SROM nGCS4 (bank4)
==============================================<-------0x2000_0000
| SROM nGCS3 (bank3)
==============================================<-------0x1800_0000
| SROM nGCS2 (bank2)
==============================================<-------0x1000_0000
| SROM nGCS1 (bank1)
==============================================<-------0x0800_0000
| SROM nGCS0 (bank0)
==============================================<-------0x0000_0000
上面的每個bank最大支持128M,除了bank0,其它的每個bank都支持8/16/32位操作,bank0只支持16/32位操作,在我的板子上,F(xiàn)lash接bank0,一共8M,16位,SDRAM接bank6,一個32M,32位。所以啟動的時候,CPU從0x0000_0000開始執行,而在這上面的NorFlash,存放的是U-Boot,用于啟動Linux的。
而我們目前所做的工作就是要把U-Boot移植成功,然后燒寫到該地址,假設你的板子的供應商已經提供了少些的工具,等到我們少些成功,我們就可以通過網絡來加載Linux,通過串口來調試了,至于怎么做的,我們慢慢來,以后的帖子會涉及到。。。
在上面的存儲地址布局中,SFR Area就是各個接口控制器的地址,我們可以把它定義如下,來自華恒PPCboot上面的源代碼中的頭文件s3c2410.h:

#define rBWSCON (*(volatile unsigned *)0x48000000)
#define rBANKCON0 (*(volatile unsigned *)0x48000004)
#define rBANKCON1 (*(volatile unsigned *)0x48000008)
#define rBANKCON2 (*(volatile unsigned *)0x4800000C)
#define rBANKCON3 (*(volatile unsigned *)0x48000010)
#define rBANKCON4 (*(volatile unsigned *)0x48000014)
#define rBANKCON5 (*(volatile unsigned *)0x48000018)
#define rBANKCON6 (*(volatile unsigned *)0x4800001C)
#define rBANKCON7 (*(volatile unsigned *)0x48000020)
#define rREFRESH (*(volatile unsigned *)0x48000024)
#define rBANKSIZE (*(volatile unsigned *)0x48000028)
#define rMRSRB6 (*(volatile unsigned *)0x4800002C)
#define rMRSRB7 (*(volatile unsigned *)0x48000030)

#define rHcRevision (*(volatile unsigned *)0x49000000)
#define rHcControl (*(volatile unsigned *)0x49000004)
#define rHcCommonStatus (*(volatile unsigned *)0x49000008)
#define rHcInterruptStatus (*(volatile unsigned *)0x4900000C)
#define rHcInterruptEnable (*(volatile unsigned *)0x49000010)
#define rHcInterruptDisable (*(volatile unsigned *)0x49000014)
#define rHcHCCA (*(volatile unsigned *)0x49000018)
#define rHcPeriodCuttendED (*(volatile unsigned *)0x4900001C)
#define rHcControlHeadED (*(volatile unsigned *)0x49000020)
#define rHcControlCurrentED (*(volatile unsigned *)0x49000024)
#define rHcBulkHeadED (*(volatile unsigned *)0x49000028)
#define rHcBuldCurrentED (*(volatile unsigned *)0x4900002C)
#define rHcDoneHead (*(volatile unsigned *)0x49000030)
#define rHcRmInterval (*(volatile unsigned *)0x49000034)
#define rHcFmRemaining (*(volatile unsigned *)0x49000038)
#define rHcFmNumber (*(volatile unsigned *)0x4900003C)
#define rHcPeriodicStart (*(volatile unsigned *)0x49000040)
#define rHcLSThreshold (*(volatile unsigned *)0x49000044)
#define rHcRhDescriptorA (*(volatile unsigned *)0x49000048)
#define rHcRhDescriptorB (*(volatile unsigned *)0x4900004C)
#define rHcRhStatus (*(volatile unsigned *)0x49000050)
#define rHcRhPortStatus1 (*(volatile unsigned *)0x49000054)
#define rHcRhPortStatus2 (*(volatile unsigned *)0x49000058)

#define rSRCPND (*(volatile unsigned *)0x4A000000)
#define rINTMOD (*(volatile unsigned *)0x4A000004)
#define rINTMSK (*(volatile unsigned *)0x4A000008)
#define rPRIORITY (*(volatile unsigned *)0x4A00000C)
#define rINTPND (*(volatile unsigned *)0x4A000010)
#define rINTOFFSET (*(volatile unsigned *)0x4A000014)
#define rSUBSRCPND (*(volatile unsigned *)0x4A000018)
#define rINTSUBMSK (*(volatile unsigned *)0x4A00001C)

#define rULCON0 (*(volatile unsigned *)0x50000000)
#define rUCON0 (*(volatile unsigned *)0x50000004)
#define rUFCON0 (*(volatile unsigned *)0x50000008)
#define rUMCON0 (*(volatile unsigned *)0x5000000C)
#define rUTRSTAT0 (*(volatile unsigned *)0x50000010)
#define rUERSTAT0 (*(volatile unsigned *)0x50000014)
#define rUFSTAT0 (*(volatile unsigned *)0x50000018)
#define rUMSTAT0 (*(volatile unsigned *)0x5000001C)
#define rUBRDIV0 (*(volatile unsigned *)0x50000028)
#define rULCON1 (*(volatile unsigned *)0x50004000)
#define rUCON1 (*(volatile unsigned *)0x50004004)
#define rUFCON1 (*(volatile unsigned *)0x50004008)
#define rUMCON1 (*(volatile unsigned *)0x5000400C)
#define rUTRSTAT1 (*(volatile unsigned *)0x50004010)
#define rUERSTAT1 (*(volatile unsigned *)0x50004014)
#define rUFSTAT1 (*(volatile unsigned *)0x50004018)
#define rUMSTAT1 (*(volatile unsigned *)0x5000401C)
#define rUBRDIV1 (*(volatile unsigned *)0x50004028)
#define rULCON2 (*(volatile unsigned *)0x50008000)
#define rUCON2 (*(volatile unsigned *)0x50008004)
#define rUFCON2 (*(volatile unsigned *)0x50008008)
#define rUTRSTAT2 (*(volatile unsigned *)0x50008010)
#define rUERSTAT2 (*(volatile unsigned *)0x50008014)
#define rUFSTAT2 (*(volatile unsigned *)0x50008018)
#define rUBRDIV2 (*(volatile unsigned *)0x50008028)
#ifdef __BIG_ENDIAN
#define rUTXH0 (*(volatile unsigned char *)0x50000023)
#define rURXH0 (*(volatile unsigned char *)0x50000027)
#define rUTXH1 (*(volatile unsigned char *)0x50004023)
#define rURXH1 (*(volatile unsigned char *)0x50004027)
#define rUTXH2 (*(volatile unsigned char *)0x50008023)
#define rURXH2 (*(volatile unsigned char *)0x50008027)
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000023)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000027)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004023)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004027)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008023)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008027)
#define UTXH0 (0x50000020+3)
#define URXH0 (0x50000024+3)
#define UTXH1 (0x50004020+3)
#define URXH1 (0x50004024+3)
#define UTXH2 (0x50008020+3)
#define URXH2 (0x50008024+3)
#else
#define rUTXH0 (*(volatile unsigned char *)0x50000020)
#define rURXH0 (*(volatile unsigned char *)0x50000024)
#define rUTXH1 (*(volatile unsigned char *)0x50004020)
#define rURXH1 (*(volatile unsigned char *)0x50004024)
#define rUTXH2 (*(volatile unsigned char *)0x50008020)
#define rURXH2 (*(volatile unsigned char *)0x50008024)
#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0() (*(volatile unsigned char *)0x50000024)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
#define RdURXH1() (*(volatile unsigned char *)0x50004024)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
#define RdURXH2() (*(volatile unsigned char *)0x50008024)
#define UTXH0 (0x50000020)
#define URXH0 (0x50000024)
#define UTXH1 (0x50004020)
#define URXH1 (0x50004024)
#define UTXH2 (0x50008020)
#define URXH2 (0x50008024)
#endif

#define rTCFG0 (*(volatile unsigned *)0x51000000)
#define rTCFG1 (*(volatile unsigned *)0x51000004)
#define rTCON (*(volatile unsigned *)0x51000008)
#define rTCNTB0 (*(volatile unsigned *)0x5100000C)
#define rTCMPB0 (*(volatile unsigned *)0x51000010)
#define rTCNTO0 (*(volatile unsigned *)0x51000014)
#define rTCNTB1 (*(volatile unsigned *)0x51000018)
#define rTCMPB1 (*(volatile unsigned *)0x5100001C)
#define rTCNTO1 (*(volatile unsigned *)0x51000020)
#define rTCNTB2 (*(volatile unsigned *)0x51000024)
#define rTCMPB2 (*(volatile unsigned *)0x51000028)
#define rTCNTO2 (*(volatile unsigned *)0x5100002C)
#define rTCNTB3 (*(volatile unsigned *)0x51000030)
#define rTCMPB3 (*(volatile unsigned *)0x51000034)
#define rTCNTO3 (*(volatile unsigned *)0x51000038)
#define rTCNTB4 (*(volatile unsigned *)0x5100003C)
#define rTCNTO4 (*(volatile unsigned *)0x51000040)

本文引用地址:http://m.butianyuan.cn/article/201611/318881.htm


關鍵詞: S3C2410內存映

評論


技術專區

關閉