單片機學習——用ds1302制作一個精密電子鐘,按鍵調節

解決方案：

#include
#include
#define uchar unsigned char
#define uint unsigned int
#define DEC2BCD(X) ((X/10)<<4 | (X%10)) //用于將十進制轉成BCD碼的宏
#define BCD2DEC(X) (((X&0x70)>>4)*10 + (X&0x0F)) //用于將BCD碼轉成十進制的宏
void write_com(uchar com);
void write_data(uchar dat);
void init();
void write_time(uchar add,uchar dat);
void write_riqi(uchar add,uchar dat);
void write_xingqi(uchar dat);
void write_byte(uchar dat);
uchar read_byte();
void s_write(uchar add,uchar dat);
void s_write(uchar add,uchar dat);
uchar s_read(uchar add);
void set_ds1302(uchar *pClock);
void rw_ds1302();
void keyscan();

uchar data table[]="2009-01-01 Mon.";
uchar data table1[]=" 00:00:00";
uchar code xingqi[]="Mon. Tue. Wed. Thu. Fri. Sat. Sun.";
uchar code time[]={0x00,0x00,0x00,0x06,0x09,0x07,0x09};//sec,min,hour,date,month,week,year
uchar data time1[]={0x00,0x00,0x00,0x06,0x09,0x07,0x09};//sec,min,hour,date,month,week,year
uchar hour,min,sec,week,day,month,year,num,sfcount,flag;
sbit ds1302_sclk=P1^4;
sbit ds1302_io=P1^5;
sbit ds1302_ce=P2^2;
sbit acc0=ACC^0;
sbit acc7=ACC^7;
sbit lcdrs=P1^7; //端口定義
sbit lcdrw=P1^6;
sbit lcde=P2^4;
sbit le=P3^6;
sbit leden=P2^5;
sbit dkle=P3^7;
sbit beep=P2^7;
sbit sf=P1^0;
sbit sup=P1^1;
void delay(uint a);
void keyscan();

void main()//main函數
{
s_write(0x8e,0x80);
init();
P0=0xff;
while(1)
{
keyscan();
if(flag==0){
rw_ds1302();
}

}
}

void write_byte(uchar dat)//寫入一個字節
{
uchar i;
ACC=dat;
for(i=8;i>0;i--)
{
ds1302_io=acc0;
ds1302_sclk=1;
ds1302_sclk=0;
ACC=ACC>>1;
}
}
uchar read_byte() //讀出一個字節
{
uchar i;
for(i=8;i>0;i--)
{
ACC=ACC>>1;
acc7=ds1302_io;
ds1302_sclk=1;
ds1302_sclk=0;
}
return(ACC);
}

void s_write(uchar add,uchar dat)//單字節寫入子函數
{
ds1302_ce=0;
ds1302_sclk=0;
ds1302_ce=1;
write_byte(add);
write_byte(dat);
ds1302_sclk=1;
ds1302_ce=0;
}
uchar s_read(uchar add) //單字節讀出子函數
{
uchar temp;
ds1302_ce=0;
ds1302_sclk=0;
ds1302_ce=1;
write_byte(add);
temp=read_byte();
ds1302_sclk=1;
ds1302_ce=0;

temp=BCD2DEC(temp);

return(temp);
}
void set_ds1302(uchar *pClock)//設置ds1302的時間
{
uchar i;
uchar add=0x80;
EA=0;
s_write(0x8e,0x00);
for(i=7;i>0;i--)
{
s_write(add,*pClock);
pClock++;
add+=2;
}
s_write(0x8e,0x80);
EA=1;
}
void rw_ds1302() //讀寫ds1302
{
EA=0;
sec=s_read(0x81);
write_time(8,sec);
write_com(0x80+0x40+9);
min=s_read(0x83);
write_time(5,min);
write_com(0x80+0x40+6);
hour=s_read(0x85);
write_time(2,hour);
write_com(0x80+0x40+3);
week=s_read(0x8b);
write_xingqi(week);
write_com(0x80+0x0d);
day=s_read(0x87);
write_riqi(8,day);
write_com(0x80+9);
month=s_read(0x89);
write_riqi(5,month);
write_com(0x80+6);
year=s_read(0x8d);
write_riqi(2,year);
write_com(0x80+3);
EA=1;
}
void write_com(uchar com) //寫命令子函數
{
lcde=0;
lcdrw=0;
lcdrs=0;
delay(1);
lcde=1;
delay(1);
P0=com;
delay(1);
lcde=0;
}
void write_data(uchar dat)//寫數據子函數
{
lcde=0;
lcdrw=0;
lcdrs=1;
delay(1);
lcde=1;
delay(1);
P0=dat;
delay(1);
lcde=0;
}
void init()
{
s_write(0x90,0xa5);
set_ds1302(time);
delay(5);
lcde=0; //LCD1602初始化
le=0;
leden=0;
write_com(0x38);
delay(100);
write_com(0x38);
delay(50);
write_com(0x38);
delay(10);
write_com(0x08);
write_com(0x01);
write_com(0x0c);
write_com(0x80);

for(num=0;num<15;num++) //在第一行顯示“ 2000-00-00 Mon.”
{
write_data(table[num]);
}
write_com(0x80+0x40);
for(num=0;num<10;num++) //在第二行末尾顯示“ 00:00:00”
{
write_data(table1[num]);
}

}
void write_time(uchar add,uchar dat) //寫入時間子函數
{
uchar shi,ge;
shi=dat/10;
ge=dat%10;
write_com(0x80+0x40+add);
write_data(0x30+shi);
write_data(0x30+ge);
}
void write_riqi(uchar add,uchar dat) //寫入日期子函數
{
uchar shi,ge;
shi=dat/10;
ge=dat%10;
write_com(0x80+add);
write_data(0x30+shi);
write_data(0x30+ge);
}
void write_xingqi(uchar dat) //寫入星期子函數
{
write_com(0x80+0x0b);
switch(dat)
{
case 1: for(num=0;num<4;num++)
{
write_data(xingqi[num]);
};break;
case 2: for(num=5;num<9;num++)
{
write_data(xingqi[num]);
};break;
case 3: for(num=10;num<14;num++)
{
write_data(xingqi[num]);
};break;
case 4: for(num=15;num<19;num++)
{
write_data(xingqi[num]);
};break;
case 5: for(num=20;num<24;num++)
{
write_data(xingqi[num]);
};break;
case 6: for(num=25;num<29;num++)
{
write_data(xingqi[num]);
};break;
case 7: for(num=30;num<34;num++)
{
write_data(xingqi[num]);
};break;

}
}
void keyscan() //按鍵掃描子函數
{
if(sf==0)//功能鍵
{
delay(2);
if(sf==0)
{
while(!sf);

sfcount++;
if(sfcount==1) //秒針閃爍
{
flag=1;
s_write(0x80,0x80);//使時鐘暫停
write_com(0x80+0x40+9);
write_com(0x0f);
}
if(sfcount==2) //分針閃爍
{
write_com(0x80+0x40+6);
}
if(sfcount==3) //時針閃爍
{
write_com(0x80+0x40+3);
}
if(sfcount==4) //星期閃爍
{
write_com(0x80+0x0d);
}
if(sfcount==5)//天閃爍
{
write_com(0x80+9);
}
if(sfcount==6)//月閃爍
{
write_com(0x80+6);
}
if(sfcount==7)//年閃爍
{
write_com(0x80+3);
}
if(sfcount==8)//取消閃爍
{
sfcount=0;
flag=0;
set_ds1302(time1);
delay(5);
write_com(0x0c);
s_write(0x80,0x00);//使時鐘啟動
}
}
}
if(sup==0) //調節時間（上升鍵）
{
delay(5);
if(sup==0)
{
while(!sup);
if(sfcount==1)//調節秒
{
sec++;
if(sec==60)
sec=0;
time1[0]=DEC2BCD(sec);
write_time(8,sec);
write_com(0x80+0x40+9);
}
if(sfcount==2) //調節分鐘
{
min++;
if(min==60)
min=0;
time1[1]=DEC2BCD(min);
write_time(5,min);
write_com(0x80+0x40+6);
}
if(sfcount==3) //調節小時
{
hour++;
if(hour==24)
hour=0;
time1[2]=DEC2BCD(hour);
write_time(2,hour);
write_com(0x80+0x40+3);
}
if(sfcount==4) //調節星期
{
week++;
if(week==8)
week=1;
time1[5]=week;
write_xingqi(week);
write_com(0x80+0x0d);
}
if(sfcount==5) //調節日
{
day++;
if(day==32)
day=1;
time1[3]=DEC2BCD(day);
write_riqi(8,day);
write_com(0x80+9);
}
if(sfcount==6) //調節月
{
month++;
if(month==13)
month=1;
time1[4]=DEC2BCD(month);
write_riqi(5,month);
write_com(0x80+6);
}
if(sfcount==7) //調節年
{
year++;
if(year==100)
year=9;
time1[6]=DEC2BCD(year);
write_riqi(2,year);
write_com(0x80+3);
}
}
}
}
void delay(uint a) { //1ms延時子函數
uint i,j;
for(j=a;j>0;j--)
for(i=250;i>0;i--) ;
}