STM8庫函數學習筆記之ADC

庫包含ADC1和ADC2兩個模塊，為10位逐次比較型，可配置為單次或連續轉換，ADC1包含掃描模式、帶緩存的連續模式、模擬看門狗模式，具體參照所選器件，以ADC1為例。

void ADC1_AWDChannelConfig (ADC1_Channel_TypeDefChannel, FunctionalStateNewState)

使能或禁止指定通道的模擬看門狗

參數:

Channel:

指定通道，可選參數

ADC1_CHANNEL_0 = (u8)0x00, /**< Analog channel 0 */
ADC1_CHANNEL_1 = (u8)0x01, /**< Analog channel 1 */
ADC1_CHANNEL_2 = (u8)0x02, /**< Analog channel 2 */
ADC1_CHANNEL_3 = (u8)0x03, /**< Analog channel 3 */
ADC1_CHANNEL_4 = (u8)0x04, /**< Analog channel 4 */
ADC1_CHANNEL_5 = (u8)0x05, /**< Analog channel 5 */
ADC1_CHANNEL_6 = (u8)0x06, /**< Analog channel 6 */
ADC1_CHANNEL_7 = (u8)0x07, /**< Analog channel 7 */
ADC1_CHANNEL_8 = (u8)0x08, /**< Analog channel 8 */
ADC1_CHANNEL_9 = (u8)0x09 /**< Analog channel 9 */

NewState：

新的狀態，可選參數

ENABLE

DISABLE