51單片機流水燈C語言源程序
作者：
時間：2016-11-25
來源：網絡
收藏
加入技術交流群
掃碼加入
和技術大咖面對面交流
海量資料庫查詢
文件名稱：flash_led.c
文件說明：流水燈C程序
編寫日期：2006年10月5日
程序說明：MCU采用AT89S51，外接12M晶振，P1口輸出
*************************************************************/
#include //51系列單片機定義文件
#define uchar unsigned char //定義無符號字符
#define uint unsigned int //定義無符號整數
void delay(uint); //聲明延時函數
void main(void)
{
uint i;
uchar temp;
while(1)
{
temp=0x01;
for(i=0;i<8;i++) //8個流水燈逐個閃動
{
P1=~temp;
delay(100); //調用延時函數
temp<<=1;
}
temp=0x80;
for(i=0;i<8;i++) //8個流水燈反向逐個閃動
{
P1=~temp;
delay(100); //調用延時函數
temp>>=1;
}
temp=0xFE;
for(i=0;i<8;i++) //8個流水燈依次全部點亮
{
P1=temp;
delay(100); //調用延時函數
temp<<=1;
}
temp=0x7F;
for(i=0;i<8;i++) //8個流水燈依次反向全部點亮
{
P1=temp;
delay(100); //調用延時函數
temp>>=1;
}
}
}
void delay(uint t) //定義延時函數
{
register uint bt;
for(;t;t--)
for(bt=0;bt<255;bt++);
}
#include
#include
#include
#define uchar unsigned char
#define uint unsigned int
#define TimeDelay 60000
void delay(uint n);
void Flash0a(void);
void Flash0b(void);
void Flash1a(void);
void Flash1b(void);
void Flash2a(void);
void Flash2b(void);
void Flash3a(void);
void Flash3b(void);
void main(void)
{
while(1)
{
Flash1b();
Flash1a();
delay(TimeDelay);
delay(TimeDelay);
Flash0b();
Flash0a();
Flash2b();
Flash2a();
Flash1b();
Flash1a();
Flash3b();
Flash3a();
}
}
void delay(uint n)
{
while(n!=0)
{
n--;
}
}
void Flash0a(void)
{
uchar i;
uchar Temp;
Temp = 0x80;
for(i=0;i<8;i++)
{
P0 = ~Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P0 = 0xff;
}
void Flash0b(void)
{
uchar i;
uchar Temp;
Temp = 0x80;
for(i=0;i<8;i++)
{
P0 = Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P0 = 0;
}
void Flash1a(void)
{
uchar i;
uchar Temp;
P1 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P1 = ~Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P1 = 0xff;
}
void Flash1b(void)
{
uchar i;
uchar Temp;
P1 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P1 = Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P1 = 0;
}
void Flash2a(void)
{
uchar i;
uchar Temp;
P2 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P2 = ~Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P2 = 0xff;
}
void Flash2b(void)
{
uchar i;
uchar Temp;
P2 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P2 = Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P2 = 0;
}
void Flash3a(void)
{
uchar i;
uchar Temp;
P3 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P3 = ~Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P3 = 0xff;
}
void Flash3b(void)
{
uchar i;
uchar Temp;
P3 = 1;
Temp = 0x80;
for(i=0;i<8;i++)
{
P3 = Temp;
delay(TimeDelay);
Temp = Temp >> 1;
}
P3 = 0;
}
===========
;P1口八個LED燈做三路流水燈實驗
;***************************************************************
;* Date : 2004.4.20 *
;***************************************************************
ORG 0000H
LJMP MAIN
ORG 030H
MAIN:MOV P1,#0DBH ;11011011--0為亮，1為滅
ACALL DELAY
MOV P1,#06DH ;01101101
ACALL DELAY
MOV P1,#0B6H ;10110110
ACALL DELAY
AJMP MAIN
DELAY:MOV R7,#255 ;延時子程序
D1: MOV R6,#255
D2: DJNZ R6,D2
DJNZ R7,D1
RET
END
評論