這是一個用于實際產品的stc單片機按鍵處理程序頭文件和原理圖可從原帖下載:http://www.51hei.com/bbs/dpj-19294-1.html#include "STC12C5620AD.H"#include "Key_Scan.H"#include "Key_Handle.H"#include "DS1302.H"#include "Radio.H"#include "Channel_Handle.H"#include "Volume_Handle.H"/********************** 聲明外部變量**************************/extern uchar Volume; //Volume_Handle.cextern uint PLL; //From Radio.cextern bit Flag_40ms; //From Main.cextern uchar Work_Mode; //From Main.cextern uchar data Sec; //From DS1302.cextern uchar data Min; //From DS1302.cextern uchar data Hour; //From DS1302.cextern uchar data Date; //From DS1302.cextern uchar data Month; //From DS1302.cextern uchar data Day; //From DS1302.cextern uchar data Year; //From DS1302.cextern uchar Display_Channel[]; //From Main.c/********************** 定義變量**************************/uchar Radio_Index; //預置電臺切換計數,0-15,8用于記錄最后一次的電臺uchar Key_Flag=0x00; //按鍵計時,有按鍵時清零,無按鍵10S左右使Woke_Mode=0;/********************** 按鍵處理**************************/void Key_Handle(){uchar Time_Write_Temp; //調整用的緩存uchar Key_Value;Radio_Index=EEPROM_Get_Index(); //獲取頻道序號Display_Channel[3]=(Radio_Index/10)|0x30; Display_Channel[4]=(Radio_Index%10)|0x30; //顯示頻道序號if(Flag_40ms){Key_Value=Key_Scan(); //40ms進行一次掃描Flag_40ms=0;Key_Flag++;if(Key_Flag>=250){Key_Flag=250;LCD_BLK=0;Work_Mode=0; //無按鍵10s后,自動回到模式0}elseLCD_BLK=1;}switch (Key_Value){case 0x0e: //按下MENUswitch (Work_Mode){case 0:Work_Mode=1; //進入電臺搜索break;case 1:Work_Mode=2; //進入調節年份break;case 2:Work_Mode=3; //進入調節月份break;case 3:Work_Mode=4; //進入調節日break;case 4:Work_Mode=5; //進入調節星期break;case 5:Work_Mode=6; //進入調節時break;case 6:Work_Mode=7; //進入調節分break;case 7:DS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x80,0x00); //秒置0DS1302_Write_Data(0x8e,0x80); // 開啟寫保護Work_Mode=0; //回到正常顯示break;default:break;}Key_Flag=0; //清除按鍵計時break;case 0x0d: //按下|<>4)*10+(Year&0x0f); //裝換成十進制數if(Time_Write_Temp==0){Time_Write_Temp=99;}else{Time_Write_Temp--;}Year=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x8c,Year); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 3: //月減少 Time_Write_Temp=(Month>>4)*10+(Month&0x0f); //裝換成十進制數if(Time_Write_Temp==1){Time_Write_Temp=12;}else{Time_Write_Temp--;}Month=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x88,Month); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 4: //日減少 Time_Write_Temp=(Date>>4)*10+(Date&0x0f); //裝換成十進制數if(Time_Write_Temp==1){Time_Write_Temp=31;}else{Time_Write_Temp--;}Date=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x86,Date); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 5: //星期減少 Time_Write_Temp=(Day>>4)*10+(Day&0x0f); //裝換成十進制數if(Time_Write_Temp==1){Time_Write_Temp=7;}else{Time_Write_Temp--;}Day=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x8a,Day); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 6: //時減少 Time_Write_Temp=(Hour>>4)*10+(Hour&0x0f); //裝換成十進制數if(Time_Write_Temp==0){Time_Write_Temp=23;}else{Time_Write_Temp--;}Hour=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x84,Hour); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 7: //分減少 Time_Write_Temp=(Min>>4)*10+(Min&0x0f); //裝換成十進制數if(Time_Write_Temp==0){Time_Write_Temp=59;}else{Time_Write_Temp--;}Min=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x82,Min); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 8: //音量調節Volume+=5; //音量減小5dBif(Volume>=35)Volume=35;Volume_Write(Volume); //寫入聲音參數break;default:break;}Key_Flag=0; //清除按鍵計時break;case 0x0b: //按下>>|switch (Work_Mode){case 0: //正常狀態Radio_Index++; //下一個預置電臺if(Radio_Index==16)Radio_Index=1;EEPROM_Write_Index(Radio_Index); //更新新電臺序號PLL=EEPROM_Get_PLL(Radio_Index); //更新新電臺PLLTEA5767_Update_PLL(); //寫入PLLbreak;case 1:TEA5767_User_Search(1); //向上手動搜索break;case 2: //年增加 Time_Write_Temp=(Year>>4)*10+(Year&0x0f); //裝換成十進制數if(Time_Write_Temp==99){Time_Write_Temp=0;}else{Time_Write_Temp++;}Year=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x8c,Year); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 3: //月增加 Time_Write_Temp=(Month>>4)*10+(Month&0x0f); //裝換成十進制數if(Time_Write_Temp==12){Time_Write_Temp=1;}else{Time_Write_Temp++;}Month=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x88,Month); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 4: //日增加 Time_Write_Temp=(Date>>4)*10+(Date&0x0f); //裝換成十進制數if(Time_Write_Temp==31){Time_Write_Temp=1;}else{Time_Write_Temp++;}Date=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x86,Date); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 5: //星期增加 Time_Write_Temp=(Day>>4)*10+(Day&0x0f); //裝換成十進制數if(Time_Write_Temp==7){Time_Write_Temp=1;}else{Time_Write_Temp++;}Day=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x8a,Day); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 6: //時增加 Time_Write_Temp=(Hour>>4)*10+(Hour&0x0f); //裝換成十進制數if(Time_Write_Temp==23){Time_Write_Temp=0;}else{Time_Write_Temp++;}Hour=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x84,Hour); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 7: //分增加 Time_Write_Temp=(Min>>4)*10+(Min&0x0f); //裝換成十進制數if(Time_Write_Temp==59){Time_Write_Temp=0;}else{Time_Write_Temp++;}Min=(Time_Write_Temp/10)<<4|(Time_Write_Temp%10); //裝換成BCDDS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x82,Min); //寫入DS1302_Write_Data(0x8e,0x80); // 開啟寫保護break;case 8: //音量調節if(Volume<=0)Volume=0; elseVolume-=5; //音量增加5dBVolume_Write(Volume); //寫入聲音參數break;default:break;}Key_Flag=0; //清除按鍵計時break;case 0x07: //按下SET{ switch (Work_Mode){case 0: //正常狀態Work_Mode=8; //轉到音量調節狀態break;case 1: //電臺搜索EEPROM_Save_PLL(Radio_Index,PLL); //存入新收到的電臺Work_Mode=0;break;case 8: //音量調節狀態Work_Mode=0; //轉到正常狀態break;default:DS1302_Write_Data(0x8e,0x00); // 禁止寫保護DS1302_Write_Data(0x80,0x00); //置秒為00,并啟動時鐘DS1302_Write_Data(0x8e,0x80); // 開啟寫保護Work_Mode=0;break;} }Key_Flag=0; //清除按鍵計時break;default:break;} }
評論