新聞中心

EEPW首頁 > 嵌入式系統 > 設計應用 > 單片機應用實例:LED顯示電腦電子鐘

單片機應用實例:LED顯示電腦電子鐘

作者: 時間:2013-02-07 來源:網絡 收藏

  源程序清單如下(無溫度顯示程序):

  start:do;

  $include(reg51.dcl)

  declare (sclk,io,rst) bit at (0b3h) register; /* p33,p34,p35 */

  declare (command,data,n,temp1,num) byte;

  declare a(9) byte;

  declare ab(6) byte;

  declare aco(11) byte constant (0fdh,60h,0dah,0f2h,66h,0b6h,0beh,

  0e0h,0feh,0f6h,00h);

  declare week(11) byte constant (0edh,028h,0dch,7ch,39h,75h,0f5h,

  2ch,0fdh,7dh,00h);

  declare da literally 'p15',clk literally 'p16',ale literally 'p17',

  mk literally 'p11',sk literally 'p12';

  clear:procedure;

  sclk=0;io=0;rst=0;

  end clear;

  send1302:procedure(comm);

  declare (i,comm) byte;

  do i=0 to 7;

  comm=scr(comm,1);

  io=cy;

  call time(1);

  sclk=0;

  call time(1);

  sclk=1;

  end;

  end send1302;

  wbyt1:procedure(com,dat);/*字節寫過程*/

  declare (com,dat) byte;

  call clear;

  rst=1;

  call send1302(com);

  call send1302(dat);

  call clear;

  end wbyt1;

  wbyt8:procedure;/*時鐘多字節突發模式寫過程*/

  declare j byte;

  call clear;

  a(7)=A(6);a(6)=a(0);

  rst=1;

  call send1302(command);

  do j=1 to 8;

  call send1302(a(j));

  end;

  call clear;

  end wbyt8;

  RBYT1:PROCEDURE;

  DECLARE I BYTE;

  CALL CLEAR;

  RST=1;

  call send1302(0c1h);

  IO=1;

  DO I=0 TO 7;

  SCLK=1;

  SCLK=0;

  CY=IO;

  N=SCR(N,1);

  END;

  A(8)=N;

  CALL CLEAR;

  END RBYT1;

  send595:procedure;

  declare k byte;

  do k=0 to 7;

  data=scr(data,1);

  da=cy;

  clk=1;

  clk=0;

  end;

  end send595;

  send595_1:procedure;

  declare k byte;

  do k=0 to 7;

  data=scr(data,1);

  da1=cy;

  clk1=1;

  clk1=0;

  end;

  end send595_1;

  rb1:procedure(abc,j);

  DECLARE (I,j,abc) BYTE;

  CALL CLEAR;

  RST=1;

  call send1302(abc);

  IO=1;

  DO I=0 TO 7;

  SCLK=1;

  SCLK=0;

  CY=IO;

  N=SCR(N,1);

  END;

  ab(j)=N;

  ab(j)=dec(ab(j));

  CALL CLEAR;

  end rb1;

  rbyt6:procedure;

  call rb1(0f1h,0);

  call rb1(0f3h,1);

  call rb1(0f5h,2);

  call rb1(0f7h,3);

  call rb1(0f9h,4);

  call rb1(0fbh,5);

  call rb1(0fdh,6);

  end rbyt6;

  wbyt6:procedure;

  call wbyt1(8eh,0); /* write enable */

  call wbyt1(0f0h,ab(0));

  call wbyt1(0f2h,ab(1));

  call wbyt1(0f4h,ab(2));

  call wbyt1(0f6h,ab(3));

  call wbyt1(0f8h,ab(4));

  call wbyt1(0fah,ab(5));

  call wbyt1(0fch,ab(6));

  call wbyt1(8eh,80h); /* write disable */

  end wbyt6;

  rbyt8:procedure;/*時鐘多字節突發模式讀過程*/

  declare (i,j) byte;

  call clear;

  rst=1;

  call send1302(command);

  io=1;

  do j=1 to 8;

  do i=0 to 7;

  sclk=1;

  call time(1);

  sclk=0;

  cy=io;

  n=scr(n,1);

  end;

  a(j)=n;

  end;

  call clear;

  a(0)=a(6);a(6)=A(7);

  a(0)=a(0) and 0fh;

  if a(0)>6 then a(0)=0;

  CALL RBYT1;

  if (a(1)=0 and a(2)=0 and a(3)=0) then

  do;

  do num=0 to 35;

  call time(250);

  end;

  temp1=1;

  end;

  if temp1=1 then

  do;

  temp1=0;

  ab(4)=ab(4)+1;

  if ab(4)>99h then

  do;

  ab(4)=0;

  ab(5)=ab(5)+1;

  if ab(5)>99h then ab(5)=0;

  end;

  call wbyt6;

  end;

  end rbyt8;

  display:procedure; /*jieya,yima,fasong*/

  declare (i,n,m) byte;

  n=a(0) and 0fh; /* send week */

  data=week(n);

  call send595;

  n=a(4); /* send date */

  n=n and 0fh;

  data=aco(n);

  call send595;

  n=a(4);

  n=shr(n,4);

  data=aco(n);

  call send595;

  do i=1 to 3; /* send second,minute,hour */

  n=a(i);

  n=n and 0fh;

  data=aco(n);

  call send595;

  n=a(i);

  n=shr(n,4);

  data=aco(n);

  call send595;

  end;

  do i=5 to 6; /* send month,year */

  n=a(i);

  n=n and 0fh;

  data=aco(n);

  call send595;

  n=a(i);

  n=shr(n,4);

  data=aco(n);

  call send595;

  end;

  n=a(8); /* send 19 or 20 */

  n=n and 0fh;

  data=aco(n);

  call send595;

  n=a(8);

  n=shr(n,4);

  data=aco(n);

  call send595;

  do m=0 to 5;

  n=ab(m);

  n=n and 0fh;

  data=aco(n);

  call send595_1;

  n=ab(m);

  n=shr(n,4);

  data=aco(n);

  call send595_1;

  end;

  ale=0;

  ale=1;

  end display;

  beginset:procedure;

  a(0)=06h;a(1)=58h;a(2)=59h;a(3)=23h;

  a(4)=30h;a(5)=06h;a(6)=97h;a(7)=00;

  a(8)=19h; /* set date/time (1997,7,1,8:00:00,week 3) */

  call wbyt1(8eh,0); /* write enable*/

  call wbyt1(80h,00h);/* start colock */

  call wbyt1(0beh,0abh);/*兩個二極管與8K電阻串聯充電*/

  command=0beh; /* write colock/date */

  call wbyt8;

  call wbyt1(0c0h,a(8));

  call wbyt1(8eh,80h); /* set write protect bit */

  end beginset;

  key:procedure;

  declare (i,time1,k1,tem) byte;

  call time(100);

  k1=7;time1=30;

  if mk=0 then

  do;

  do while time1>0;

  week: if k1=0 then

  do;

  do i=0 to 5;

  /* call hz(a(0)); */

  end;

  do i=0 to 3;

  /* call hz0; */

  end;

  end;

  tem=a(k1);

  if k1=7 then tem=a(8);

  a(k1)=0aah;

  if k1=7 then a(8)=0aah;

  call display;

  call time(254);

  call time (254);

  a(k1)=tem;

  if k1=7 then a(8)=tem;

  call display;

  call time(254);

  call time(254);

  call time(254);

  time1=time1-1;

  if mk=0 then

  do;call time(100); /*MOD KEY PROCESS*/

  TIME1=30;

  IF MK=0 THEN

  DO;

  k1=k1-1;

單片機相關文章:單片機教程


單片機相關文章:單片機視頻教程


單片機相關文章:單片機工作原理




評論


相關推薦

技術專區

關閉