關 閉

新聞中心

EEPW首頁 > 工控自動化 > 設計應用 > 基于PS92010設計的高效PWM LED驅動方案

基于PS92010設計的高效PWM LED驅動方案

作者: 時間:2010-05-20 來源:網絡 收藏
是TI 公司的控制器,集成了頻率折返和低功耗工作模式,以降低輕負載和無負載時的工作頻率,從而提高的效率.主要用在住宅區照明以及各種照明.本文介紹了主要特性,方框圖,開路測試電路,典型應用電路以及離線LED照明模塊TEVM-592主要特性和電路圖與材料清單.

The TPS92010 is a controller with advanced energy features to provide high efficiency driving for LED lighting applications.

The TPS92010 incorporates frequency fold back and low power mode operation to reduce the operation frequency at light load and no load operations.

The TPS92010 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is C40℃ to 105℃.

PS92010主要特性:

LED Lighting Current Driver Controller with Energy Saving Features

Quasi-Resonant Mode Operation for Reduced EMI and Low Switching Losses (Low Voltage Switching)

Low Standby Current for Deep Dimming Efficiency Power Consumption

Low Startup Current: 25 µA Maximum

Programmable Line and Load Overvoltage Protection

Provides Open LED Protection

Internal Overtemperature Protection

Current Limit Protection

Cycle-by-Cycle Power Limit

Primary-Side Overcurrent Hiccup Restart Mode

1-A Sink TrueDrive, C0.75-A Source Gate Drive Output

Programmable Soft-Start

PS92010應用:

Residential LED Lighting Drivers for A19 E12/E26/27, GU10, MR16, PAR30/38 Integral Lamps

Drivers for Wall Sconces, Pathway Lighting and Overhead Lighting

Drivers for Wall Washing, Architectural and Display Lighting


圖1.PS92010方框圖

圖2.PS92010開路測試電路

圖3.PS92010應用電路

圖4.PS92010 QR檢測詳細電路

pwm相關文章:pwm原理



上一頁 1 2 下一頁

評論


相關推薦

技術專區

關閉