新聞中心

EEPW首頁 > 嵌入式系統 > 設計應用 > 如何將Ubuntu14.04 Server安全的升級到14.10

如何將Ubuntu14.04 Server安全的升級到14.10

作者: 時間:2016-09-12 來源:網絡 收藏

你可能已經知道如何將你的 Ubuntu 桌面升級到最新版本了,不過如果你用的 Ubuntu ,而且也正好又希望升級一下的話(前提是,不會影響你的應用。一般來說,對于服務器操作系統,應該采用保守態度。如果不是必須升級才能解決的安全問題,最好不要升級,而是采用各種外部手段來解決。)

本文引用地址:http://m.butianyuan.cn/article/201609/304229.htm

如果想從Ubuntu14.04/13.10/13.04/12.10/12.04或者更老的版本升級到14.10,只要遵循下面給出的步驟。注意,你不能直接從13.10升級到14.10。你應該先將13.10升級到14.04在從14.04升級到14.10。下面是詳細步驟。

下面的步驟不僅能用于14.10,也兼容于一些像Lubuntu14.10,Kubuntu14.10和Xubuntu14.10等的Ubuntu衍生版本

重要:在升級之前,保險起見,不要忘了將你的數據在U盤或外部硬盤上保存一下。

服務器升級

從ubuntu14.04的服務器升級到14.10的服務器,采用下面的步驟。

安裝update-manager-core 這個包如果之前沒唷安裝的話:

sudo apt-get install update-manager-core

編輯 /etc/update-manager/release-upgrades這個文件。

sudo nano /etc/update-manager/release-upgrades

像下面那樣設置Prompt=normal或者Prompt=lts

# Default behavior for the release upgrader.

[DEFAULT]

# Default prompting behavior, valid options:

#

# never - Never check for a new release.

# normal - Check to see if a new release is available. If more than one new

# release is found, the release upgrader will attempt to upgrade to

# the release that immediately succeeds the currently-running

# release.

# lts - Check to see if a new LTS release is available. The upgrader

# will attempt to upgrade to the first LTS release available after

# the currently-running one. Note that this option should not be

# used if the currently-running release is not itself an LTS

# release, since in that case the upgrader won't be able to

# determine if a newer release is available.

Prompt=normal

現在可以通過下面的命令來更新你的服務系統了。

sudo do-release-upgrade -d

直到屏幕提示你已完成。



關鍵詞: Server linux

評論


相關推薦

技術專區

關閉