STM32單片機學習(9) LCD1602顯示屏輸出實驗

注:使用普中科技開發板測試時,需要拔掉Boot1插口 接5V電壓,重啟

/**	* 軟件功能:	LCD1602實驗（軟件延時方式）* */#include "stm32f10x.h"#include "delay.h"#include /*定義宏變量lcd_RS = data/command(H/L) 數據/命令操作lcd_RW = read/write(H/L)   讀寫操作lcd_Enable 使能操作lcd_GPIO lcd1602接在了GPIOX口*///接口#define lcd_GPIO 		GPIOB#define lcd_busyflag    GPIO_Pin_15 //DB7對應的口#define lcd_pin_RS 		GPIO_Pin_1			 #define lcd_pin_RW 		GPIO_Pin_2#define lcd_pin_Enable 	GPIO_Pin_0//狀態#define lcd_DATA 	1#define lcd_COMMAND 0#define lcd_READ 	1#define lcd_WRITE 	0//功能#define lcd_RS(n)	  	n ? GPIO_SetBits(lcd_GPIO,lcd_pin_RS) : GPIO_ResetBits(lcd_GPIO,lcd_pin_RS)#define lcd_RW(n)		n ? GPIO_SetBits(lcd_GPIO,lcd_pin_RW) : GPIO_ResetBits(lcd_GPIO,lcd_pin_RW)#define lcd_Enable(n)   n ? GPIO_SetBits(lcd_GPIO,lcd_pin_Enable) : GPIO_ResetBits(lcd_GPIO,lcd_pin_Enable)void RCC_Configuration(void);void GPIO_Configuration(void);void Lcd_Write(u8 type,u8 buf); void Lcd_WriteString(u8 *buf);int Lcd_isbusy(void);void Lcd_Init(void);int fputc(int ch, FILE *f);void getSys_ID(void);/*函數: int main(void)功能: main主函數參數: 無返回: 無/int main(void){int i=0;unsigned char* display_1={"chip ID:"};//unsigned char* display_2={"www.llqqww.com"};RCC_Configuration();GPIO_Configuration();delay_init(72);Lcd_Init();//while(1){while(Lcd_isbusy());       //檢測忙信號Lcd_Write(lcd_COMMAND,0x80);    //第一行第一個字開始for(i=0;display_1[i]!=