矩陣鍵盤鍵值在數碼管上進行顯示

#include
typedef unsigned int uint;
typedef unsigned charuchar;
sbit BEEP=P3^3;
uchar code smg_tab[]={0x28,0x7e,0xa2,0x62,0x74,0x61,0x21,0x7a,0x20,0x60,0x30,0x25,0xa9,0x26,0xa1,0Xb1};
//延時函數
void _delay_ms(uint x)
{
uchar i;
while(x--);
for(i=0;i<120;i++);
}
//蜂鳴器函數
void Beep(void)
{
uchar i;
for(i=0;i<100;i++)
{
BEEP=~BEEP;
_delay_ms(1);
}
BEEP=1;
}
//鍵盤掃描函數
void Scan_Key(void)
{
P1=0xfe;//PD口(11101111)第1行為低
if((P1&0xf0)!=0xf0)//如果不等于0X0F則有按下
{
_delay_ms(10);//延時10MS,去抖
if((P1&0xf0)!=0xf0)//如果TEMP不等于0X0F，則說明有鍵按下
{
switch(P1)//判斷TEMP的值
{
case 0xee:P2=0x7f;P0=smg_tab[0];break;
case 0xde:P2=0x7f;P0=smg_tab[1];break;
case 0xbe:P2=0x7f;P0=smg_tab[2];break;
case 0x7e:P2=0x7f;P0=smg_tab[3];break;
}
Beep();
}
}
P1=0xfd;
if((P1&0xf0)!=0xf0)
{
_delay_ms(10);
if((P1&0xf0)!=0xf0)
{
switch(P1)
{
case 0xed:P2=0x7f;P0=smg_tab[4];break;
case 0xdd:P2=0x7f;P0=smg_tab[5];break;
case 0xbd:P2=0x7f;P0=smg_tab[6];break;
case 0x7d:P2=0x7f;P0=smg_tab[7];break;
}
Beep();
}
}
P1=0xfb;
if((P1&0xf0)!=0xf0)
{
_delay_ms(10);
if((P1&0xf0)!=0xf0)
{
switch(P1)
{
case 0xeb:P2=0x7f;P0=smg_tab[8];break;
case 0xdb:P2=0x7f;P0=smg_tab[9];break;
case 0xbb:P2=0x7f;P0=smg_tab[10];break;
case 0x7b:P2=0x7f;P0=smg_tab[11];break;
}
Beep();
}
}
P1=0xf7;
if((P1&0xf0)!=0xf0)
{
_delay_ms(10);
if((P1&0xf0)!=0xf0)
{
switch(P1)
{
case 0xe7:P2=0x7f;P0=smg_tab[12];break;
case 0xd7:P2=0x7f;P0=smg_tab[13];break;
case 0xb7:P2=0x7f;P0=smg_tab[14];break;
case 0x77:P2=0x7f;P0=smg_tab[15];break;
}
Beep();
}

}

}
void main(void)
{
while(1)
{
Scan_Key();
_delay_ms(100);
}
}