基于IIC總線協議的AT24C16操作程序

#include
#define uint unsigned int
#define uchar unsigned char
uchar shi,ge,t,sec,write;
uchar code table[]={0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f};
sbit sda=P2^0;
sbit scl=P2^1;
void delayms(uint z)
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void delay()
{
;;
}
void display(uchar shi,uchar ge) //顯示函數
{
P1=0xfd;
P0=table[ge];
delayms(5);
P1=0xfe;
P0=table[shi];
delayms(5);
}
void start() //起始信號
{
sda=1;
delay();
scl=1;
delay();
sda=0;
delay();
}
void stop() //終止信號
{
sda=0;
delay();
scl=1;
delay();
sda=1;
delay();
}
void respons() //應答信號
{
uchar i;
scl=1;
delay();
while((sda==1)&&(i<250))i++;
scl=0;
delay();
}
void init() //初始化
{
sda=1;
delay();
scl=1;
delay();
}
void write_byte(uchar date) //寫數據函數
{
uchar i,temp;
temp=date;
for(i=0;i<8;i++)
{
temp=temp<<1;//將數據左移一位，最高位移至CY
scl=0;
delay();
sda=CY;
delay();
scl=1;
delay();
}
scl=0;
delay();
sda=1;
delay();
}
uchar read_byte() //讀數據函數
{
uchar i,k;
scl=0;
delay();
sda=1;
delay();
for(i=0;i<8;i++)
{
scl=1;
delay();
k=(k<<1)|sda; //或運算，sda為0或者1，放到了k的最低位了，因k最低位為0
scl=0;
delay();
}
return k; //即為讀到的數據
}
void write_add(uchar address,uchar date) //在某地址上寫數據
{
start(); //起始信號
write_byte(0xa0); //發送器件地址，最低位為0,表示主機發送
respons(); //應答
write_byte(address);//發送某器件存儲單元地址
respons(); //應答
write_byte(date); //寫數據
respons(); //應答
stop(); //停止
}
uchar read_add(uchar address) //在某地址上讀數據
{
uchar date;
start(); //起始信號
write_byte(0xa0); //發送器件地址，最低位為0,表示主機發送
respons(); //應答
write_byte(address);//發送某器件存儲單元地址，表示要讀此位置的數據
respons(); //應答
start(); //起始
write_byte(0xa1);//發送器件地址，最低位為1,表示主機接受數據
respons();
date=read_byte();
stop();
return date;
}
void main()
{
init();
sec=read_add(2);//地址隨便寫，在一定范圍內
if(sec>100)//防止首次讀出錯誤數據
sec=0;
TMOD=0x01;
ET0=1;
EA=1;
TH0=(65536-50000)/256;
TL0=(65536-50000)%6;
TR0=1;
while(1)
{
display(sec/10,sec);
if(write==1)//一秒寫一次AT2416
{
write=0;
write_add(2,sec); //sec是十進制，在定義里面是作為二進制，自動轉化？？？？？？
}
}
}
void t0() interrupt 1
{
TH0=(65536-50000)/256;
TL0=(65536-50000)%6;
t++;
if(t==20)
{
t=0;
sec++;
write=1;
if(sec==100)
{
sec=0;
}
}
}