基于stc12c56的心電信號模擬程序

#include#include#include#define  uchar unsigned char#define  uint unsigned int#define  NUM  2           //ADC channal#define AD_SPEED1   0x60 //0110,0000   1      1     270個時鐘周期轉換一次，#define AD_SPEED2   0x40 //0100,0000   1      0     540個時鐘周期轉換一次#define AD_SPEED3   0x20 //0010,0000   0      1     810個時鐘周期轉換一次#define AD_SPEED4   0x00 //0000,0000   0      0     1080個時鐘周期轉換一次///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////uchar code SacTab[256]={0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3e,0x3e,0x3f,0x40,0x41,0x43,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f,0x50,0x51,0x52,0x53,0x54,0x54,0x55,0x55,0x54,0x54,0x53,0x53,0x52,0x51,0x50,0x4f,0x4e,0x4d,0x4c,0x4b,0x4a,0x49,0x47,0x45,0x42,0x3f,0x3d,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3b,0x39,0x37,0x35,0x32,0x2f,0x2c,0x3c,0x4c,0x5c,0x6d,0x7d,0x8d,0x9e,0xae,0xbe,0xcf,0xdf,0xef,0xff,0xdb,0xb7,0x92,0x6e,0x4a,0x25,0x00,0x08,0x10,0x18,0x20,0x28,0x30,0x34,0x38,0x3a,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3d,0x3e,0x3f,0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x48,0x4a,0x4c,0x4e,0x4f,0x50,0x51,0x52,0x53,0x53,0x54,0x54,0x55,0x55,0x56,0x57,0x57,0x58,0x58,0x59,0x59,0x5a,0x5a,0x5b,0x5b,0x5c,0x5d,0x5d,0x5e,0x5e,0x5f,0x5f,0x5f,0x5e,0x5e,0x5d,0x5d,0x5c,0x5c,0x5b,0x5b,0x5a,0x59,0x58,0x57,0x56,0x55,0x54,0x53,0x52,0x51,0x50,0x4f,0x4e,0x4d,0x4c,0x4b,0x4a,0x49,0x47,0x45,0x44,0x42,0x40,0x3e,0x3d,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3d,0x3f,0x41,0x42,0x43,0x43,0x42,0x41,0x3f,0x3d,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c,0x3c};///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////uchar code SinTab[256]={0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,0xa2,0xa5,0xa8,0xab,0xae,0xb1,0xb4,0xb7,0xba,0xbc,0xbf,0xc2,0xc5,0xc7,0xca,0xcc,0xcf,0xd1,0xd4,0xd6,0xd8,0xda,0xdd,0xdf,0xe1,0xe3,0xe5,0xe7,0xe9,0xea,0xec,0xee,0xef,0xf1,0xf2,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfd,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,0xf2,0xf1,0xef,0xee,0xec,0xea,0xe9,0xe7,0xe5,0xe3,0xe1,0xde,0xdd,0xda,0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5,0xc2,0xbf,0xbc,0xba,0xb7,0xb4,0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99,0x96,0x93,0x90,0x8d,0x89,0x86,0x83,0x80,0x80,0x7c,0x79,0x76,0x72,0x6f,0x6c,0x69,0x66,0x63,0x60,0x5d,0x5a,0x57,0x55,0x51,0x4e,0x4c,0x48,0x45,0x43,0x40,0x3d,0x3a,0x38,0x35,0x33,0x30,0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c,0x1a,0x18,0x16,0x15,0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0d,0x0e,0x10,0x11,0x13,0x15,0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27,0x29,0x2b,0x2e,0x30,0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e,0x51,0x55,0x57,0x5a,0x5d,0x60,0x63,0x66 ,0x69,0x6c,0x6f,0x72,0x76,0x79,0x7c,0x80 };////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////uchar AD_result=0,pwm_n=0,Freq=0;uchar Wave=0;float AD_n = 1.0;/////////////////////////////////////////////////////////void delay(uint delay_time);        // 延時函數void  pwm_init(void);     //用ccap0_h設置占空比void timer0_init(void);void adc_init(void);void pwm(uchar High);     //調節PWM輸出,波形發生函數uchar  get_adc(uchar channel);     //AD 采樣void button(uchar key);void Key(void);//////////////////////////////////////////////////////                                                                                                                     q/////////////////////////////////////void delay(uint delay_time)        // 延時函數{uint n;while(delay_time--){n = 4000;while(--n);}}//////////////////////////////////////////////void  pwm_init()     //用ccap0_h設置占空比{CMOD = 0X02;  //時鐘為Fosc/2CL = 0X00;CH = 0X00;CCAP0H = 255 - 0x3c;      //基準電壓CCAP0L = 255 - 0x3c;CCAPM0 = 0X42;  //0100,0010 ECOM0=1使能比較器功能  PWM＝1，使能CEX0腳 作脈寬調節輸出CCAPM1 = 0X42;CR = 1;         //啟動pwm}///////////////////////////////////////////////void timer0_init(){TMOD |= 0x01;   //定時器設置 16位TH0 = -50000 / 256;TL0 = -50000 % 256;//初始化值ET0 = 1;TR0 = 1;EA = 1;}/////////////////////////////////////////////*ADC初始化*/void  adc_init(){P1M0 = 0x0f;      //設置模式 AD采樣10或11P1M1 = 0x00;ADC_CONTR = 0x80;      //打開電源delay(50);}				   
				
            

				
					
					
				
			
                
			
							

                
			            

                            	              		              		上一頁
              		1
              		              			              		              	              				              				2
              					              						              						              				下一頁