基于C8051F的DS1302程序

#define uint unsigned int
#define uchar unsigned char
sbit SCLK = P2^3 ; //DS1302時鐘
sbit DIO = P2^4 ; //DS1302數據
sbit CE = P2^5 ; //DS1302片選
void Ds1302_Write_Byte (uchar addr, uchar dat);
uchar Ds1302_Read_Byte ( uchar addr );
void Ds1302_Write_Time(void);
void Ds1302_Read_Time(void);
void Ds1302_Init(void)

#define WRITE_SECOND 0x80
#define WRITE_MINUTE 0x82
#define WRITE_HOUR 0x84
#define WRITE_DAY 0x86
#define WRITE_MONTH 0x88
#define WRITE_WEEK 0x8A
#define WRITE_YEAR 0x8C
#define WRITE_TIMER_FLAG 0xC0

#define READ_SECOND 0x81
#define READ_MINUTE 0x83
#define READ_HOUR 0x85
#define READ_DAY 0x87
#define READ_MONTH 0x89
#define READ_WEEK 0x8B
#define READ_YEAR 0x8D
#define READ_TIMER_FLAG 0xC1
#define WRITE_PROTECT 0x8E
uchar time_buf1[8] = {20,11,8,31,13,35,10,3}; //空年月日時分秒周
uchar time_buf[8]; //空年月日時分秒周

//============================================
//函數名稱：void Ds1302_Write_Byte (byte addr, byte dat)
//功能： 串行發送地址、數據，先發低位，且在上升沿發送
//參數傳遞：有，地址和數據
//返回值： 無
//===========================================
void Ds1302_Write_Byte (uchar addr, uchar dat)
{
uchar i;
//DIOOUT; //數據端口定義為輸出
CE = 1;
//寫入目標地址：addr
addr = addr & 0xFE; //最低位置零
for (i = 0; i < 8; i ++)
{
if (addr & 0x01)
{
DIO = 1;
}
else
{
DIO = 0;
}
SCLK = 1;
SCLK = 0;
addr = addr >> 1;
}

//寫入數據：d
for (i = 0; i < 8; i ++)
{
if (dat & 0x01)
{
DIO = 1;
}
else
{
DIO = 0;
}
SCLK = 1;
SCLK = 0;
dat = dat >> 1;
}
CE = 0;; //停止DS1302總線

}