新聞中心

EEPW首頁 > 模擬技術 > 設計應用 > 接收器IC混合式混頻器、頻率合成器和IF放大器

接收器IC混合式混頻器、頻率合成器和IF放大器

作者:ADI 時間:2018-09-26 來源:電子產品世界 收藏

  致謝

本文引用地址:http://m.butianyuan.cn/article/201809/392311.htm

  隨著完整接收器鏈內在集成度的提高,開發團隊的規模也大幅增加。雖然這里無法列出為本文做出貢獻的全體人員,但本文作者非常榮幸地向下列行業專家表示由衷的謝意:Kurt Fletcher和Dominic Mai花了大量時間以實現優秀的布局并保持對稱,避免無用耦合。Vincent Bu與我們的供應商密切配合,開發必要的封裝。Susan Stevens與外部代工合作伙伴維持了良好的工作關系。Craig Levy和Rachana Kaza為這些器件開發了生產測試功能。Wendy Dutile、Ed Gorzynski和Chris Norcross都參與了測試電路的大量原型制作工作。Mark Hyslip負責業務協調,使得本項目得以成型。本文作者希望以本文紀念我們的同事,Edward J. Gorzynski。

  參考文獻

  1 Marc Goldfarb, Russel Martin, and Ed Balboni.“Novel Topology Supports Wideband Passive Mixers.”(新型拓?fù)浣Y(jié)構支持寬帶無源混頻器)Microwaves & RF,第90頁,2011年10月。

  2 Marc Goldfarb.“Apparatus and Method for a Wideband RF Mixer.”(寬帶RF混頻器裝置和方法)公司,2012年。

  數據手冊。公司,2016。

  ADRF6614數據手冊。公司,2016。

  About the Authors

  作者簡介

  Tom Bosia [thomas.bosia@analog.com] joined ADI in 2013 as an RF product engineer. Prior to Analog Devices, he was an RF test engineer at Raytheon, Cree, and Auriga Microwave, accruing over 25 years of experience in microwave semiconductors. He received a B.S.E.E. from UMass Lowell in 2001.

  Tom Bosia [thomas.bosia@analog.com]于2013年加盟ADI公司,擔任RF產品工程師。加盟ADI公司之前,在Raytheon、Cree和Auriga Microwave等公司擔任RF測試工程師,在微波半導體領域積累了超過25年的經驗。2001年獲得麻省大學羅威爾分校電氣工程學士學位。

  Russell Martin [russell.martin@analog.com] joined ADI in 2002 and had 15 years of experience releasing IC products to market as a product engineer before becoming engineering manager in the RF and Microwave Group (RFMG). He graduated from Worcester Polytechnic Institute in 2002 with a B.S.E.E.

  Russell Martin [russell.martin@analog.com]于2002年加盟ADI公司,任產品工程師,負責IC產品的市場發布工作達15年;后來成為ADI公司RF和微波部門(RFMG)的工程經理。2002年畢業于伍斯特理工學院,獲電氣工程學士學位。

  Marc Goldfarb [marc.goldfarb@analog.com] has over 35 years of design experience in analog, RF, and microwave integrated circuits in military, industrial, and consumer applications. He has worked in SiGe/silicon, GaAs, and microwave hybrid integrated circuit technologies, among others. Prior to joining Analog Devices, Marc held engineering roles at Pacific Communications Sciences, Inc. (PCSI), Raytheon, and M/A-COM Microwave Associates. He holds a Master of Engineering degree from Rensselaer Polytechnic Institute in Troy, NY, has 13 patents, and has authored numerous publications for reference and trade journals.

  Marc Goldfarb [marc.goldfarb@analog.com]在模擬、RF和微波集成電路領域擁有超過35年的設計經驗,涉及軍事、工業和消費電子等應用。他曾從事過SiGe/硅、GaAs和微波混合集成電路技術等工作。加盟ADI公司之前,Marc曾在Pacific Communications Sciences, Inc. (PCSI)、Raytheon和M/A-COM Microwave Associates公司工作,歷任多個工程職位。他畢業于紐約特洛伊倫斯勒理工學院,獲工程碩士學位;獲13項專利,在參考類資料和行業期刊上發表論文多篇。

  Marc is a design engineer with the RF and Microwave Group (RFMG) focused on the development of RF ICs for the wireless infrastructure and is presently leading the design team for a series of 5th generation communications infrastructure (5G IC) projects.

  Marc目前是RF和微波部門(RFMG)的一名設計工程師,主要負責無線基礎設施RF IC開發工作;目前擔任多個5G通信基礎設施(5G IC)項目的設計組組長。

  Dragoslav Culum [dragoslav.culum@analog.com] is a product line manager at Analog Devices. He has over 10 years of experience in wireless communications. Dragoslav joined Analog Devices in 2014 through the Hittite acquisition. He joined Hittite in 2008 and since then has held various positions including applications engineer, marketing engineer, and product line manager in a number of product lines. Dragoslav obtained his Bachelor of Engineering from McMaster University and a Master of Engineering from Carleton University.

  Dragoslav Culum [dragoslav.culum@analog.com]是ADI公司的產品線經理。他在無線通信領域擁有超過10的工作經驗。2014年,在Hittite并購?fù)瓿珊螅珼ragoslav加盟ADI。他于2008年加盟Hittite,并歷任多個職位,包括應用工程師、營銷工程師和多個產品系列的產品線經理。Dragoslav分別從麥克馬斯特大學和卡爾頓大學獲工程學士學位和工程碩士學位。

  Ben Walker [benjamin.walker@analog.com] received his Bachelor of Engineering and Master of Engineering degrees from the Massachusetts Institute of Technology, in 2003 and 2004, respectively. Since 2004, he has worked for Analog Devices, Inc., in the RF and Microwave Group on a variety of circuits for the wireless infrastructure market. Ben’s interests include phase-locked loops, voltage-controlled oscillators, and RF switch and attenuator design.

  Ben Walker [benjamin.walker@analog.com]于2003年和2004年分別獲得麻省理工學院的工程學士學位和工程碩士學位。2004年以來,他一直在ADI公司RF和微波部門工作,參與了面向無線基礎設施市場的多種電路設計工作。Ben的興趣包括鎖相環、電壓控制振蕩器和RF開關及衰減器設計。

  Ed Balboni [ed.balboni@analog.com] has 30 years’ experience designing high performance, highly integrated, radio transceiver circuits. His expertise is in microwave, RF, mixed-signal, and analog circuits in SiGe BiCMOS, bipolar, and CMOS technologies for communication products. Ed joined Analog Devices in 2000 and works in the RF IC Design Group as an IC designer and design manager. At ADI he develops high performance RF IC components supporting wireless infrastructure including cellular base stations and point-to-point microwave.

  Ed Balboni [ed.balboni@analog.com]在高性能、高集成度無線電收發器電路設計領域擁有30年經驗。他擅長基于SiGe BiCMOS、雙極性和CMOS技術設計面向通信產品的微波、RF、混合信號和模擬電路。Ed于2000年加盟ADI公司,在RF IC設計部門擔任IC設計師和設計經理。他在ADI負責開發支持無線基礎設施的高性能RF IC組件,包括蜂窩基站和點對點微波。

  Prior to joining ADI, Ed worked at Draper Laboratory in Cambridge, MA on MEMS inertial sensors and low power communication electronics. Ed graduated from University of Massachusetts Lowell with a B.S.E.E. degree in 1985 and received a M.S.E.E. degree in 1990 from Northeastern University.

  加盟ADI之前,Ed曾在麻省劍橋的Draper實驗室工作,負責MEMS慣性傳感器和低功耗通信電子元器件的設計。Ed 1985年畢業于麻省大學洛威爾分校,獲電氣工程學士學位,1990年畢業于東北大學,獲電氣工程碩士學位。


上一頁 1 2 3 下一頁

關鍵詞: ADI ADRF6612

評論


相關推薦

技術專區

關閉