鋁制及不銹鋼制壓力容器水壓試驗的聲發射監測研究
加入技術交流群
鋁制及不銹鋼制壓力容器水壓試驗的聲發射監測研究
目前，普通鋼制壓力容器的聲發射檢測的應用已非常廣泛，且技術已比較成熟，但應用聲發射技術檢測鋁制或不銹鋼制的壓力容器的水壓試驗監測還比較少。這兩類容器在某些特定范圍內的應用比較廣泛，其相應的檢測及監測也是非常重要的。本文主要討論了鋁制及不銹鋼制壓力容器試驗件的試驗性聲發射檢測，目的在于探索這兩類容器的聲發射特征，使其可應用于實際在役的容器檢測中。
THE ACOUSTIC EMISSION MONITORING OF THE ALUMINUM AND STAINLESS STEEL PRESSURE VESSEL DURING HYDRAULIC PRESSURE TESTING
Tang Zhiwen1 Sun Wei1 Kong Fangong2 Luo Haiqiang3
（1 Engineering Design Research Institute The second Artillery Corps of P.L.A, Beijng 100011）
（2 Shanghai Jiaotong University, Shanghai 200030）
（3 Physical Acoustics Corp. Beijng Office, Beijng 100101）
Abstract：At present, acoustic emission examination of commom steel pressure vessels is already extremely widespread. And the technology is already quite mature. But it is also few that the acoustic emission technology monitoring the aluminum and stainless steel pressure vessels during hydraulic pressure testing. Two kinds of these vessels have been used quite widespread in certain areas, so the corresponding examination and monitoring is extremely important. This article mainly discussed the acoustic emission monitoring of aluminum and stainless steel pressure vessels to find out acoustic emission characteristics of these two kinds of vessels, and in turn to be applied in the examination of pressure vessels in service.
Keywords：Aluminum，Stainless steel，Pressure vessel，Acoustic emission monitoring
1 試驗情況
表1 試驗加載設備
名稱 | 電動試壓泵 | 型號 | 4DY-400/6.3 |
流量 | 400L/h | 泵速 | 126min-1 |
額定排出壓力 | 63MPa | 制造廠 | 浙江海門試壓泵廠 |
表2 聲發射儀設置參數
設備 | PAC SAMOS－16 |
關鍵詞：
不銹鋼
壓力容器
水壓試驗
聲發射監測
相關推薦技術專區
|
評論