新聞中心

EEPW首頁 > 模擬技術 > 設計應用 > 選擇合適的系列電壓基準源的絕對精度電壓輸出

選擇合適的系列電壓基準源的絕對精度電壓輸出

作者： 時間：2012-01-30 來源：網絡 收藏
R>
Design D
Main Design Objectives
Low cost, loose accuracy
High absolute accuracy and precision
One-time calibrated, low drift
Low voltage, battery powered, moderate accuracy
Example Application
Consumer audio device
Lab instrument
Digital offset and gain adjustment
Portable instrument
DAC Calibration
None
Annual (gain and offset)
One-time factory (gain and offset)
None
Maximum Error Target
16LSB @ 10 bits (6-bit accuracy)
2LSB @ 14 bits (13-bit accuracy)
4LSB @ 12 bits (10-bit accuracy)
16LSB @ 12 bits (8-bit accuracy)
Estimated Initial Accuracy (from Step 2)
0.4% (4LSB @ 10 bits)
Not critical due to gain calibration
Not critical due to gain calibration
0.32% (3200ppm)
Estimated Tempco (from Step 2)
75ppm/°C
2ppm/°C
5ppm/°C
20ppm/°C
Reference Voltage(VREF) (from Step 1)
2.5V
2.5V
2.048V
1.25V
Minimum Reference Input Resistance from Data Sheet (RMIN)
18kΩ
18kΩ
7kΩ (14kΩ||14kΩ shared reference inputs)
18kΩ
Maximum Output Current Requirement (VREF/RMIN)
140μA max
140μA max
293μA max (dual DACs)
69μA max
Voltage-Reference Candidates (Initial Accuracy, Tempco, Output Curren

評論


相關推薦

技術專區

關閉